Whether you’re remodeling an entire bathroom or just a shower, waterproofing is essential to ensure your project isn’t a waste of time or just falling apart. When laying new tiles, especially in showers, bathrooms and kitchen areas, you need a perfectly flat and waterproof surface.No mortar or cement is 100% waterproof. So it is important to waterproof the area first. This will give you confidence that your shower is safe and that the rest of your home is not at risk of leaks or water damage. Caulking walls and installing a waterproof floor are essential for a bathroom that does not pose a threat to the rest of the house.To make sure the shower water is properly contained, lay tile It is important to create a waterproof membrane before. Helps protect all absorbent surfaces from severe water damage.
Preparing drywall for waterproofing
The drywall behind the shower should be waterproof for safety. Existing shower areas should be thoroughly prepared before sealing. The preparation process includes making sure all surfaces are perfectly smooth. Keep in mind that plaster walls should be completely primed with a waterproof coating, but at least 4 weeks should have passed before you can apply the coating to new plaster. Plaster takes time to fully cure without degrading or absorbing the provided waterproof coating. If you removed your old shower and the surface is uneven, you should consider plastering. Even waterproof floors with uneven floors may need to be plastered. Quick-setting gypsum products are readily available on the market and provide an even surface to work on. Surfaces that require impregnation. B. Drywall should also be thoroughly cleaned. Clean in this sense means absolutely free of dust and dirt, but it also means free of any oil or grease deposits that may have accumulated over time. Once done, the wall should be 100% dry before starting to apply the waterproof coating. This may mean letting it dry for at least a day or more as there may be no moisture or residue when it comes time to apply a waterproof coating.
Parquet Milton, Parquet Oakville, Parquet Orangeville, Parquet Richmond Hill, Parquet Valley
waterproof shower wall
When waterproofing drywall, be prepared to apply multiple coats. The first coat of your chosen waterproof coating product can be applied with a brush or roller. Before installation, be sure to apply masking tape to the joints and areas of the wood that you do not want to paint. You can apply it to the wall just like you apply paint. Just like paint, it should be evenly distributed over the area you want to be completely waterproof. Gaps around plumbing and other holes should also be completely filled with waterproof sealant to prevent water from leaking or spilling from these areas. All small holes and gaps should be plugged. It is always worth checking carefully for small gaps so that problems do not arise after laying the tile. Generally, the second coat should be applied within 2-3 hours of the first coat to ensure a completely sealed waterproof surface to start laying the selected tile.